Product ID:LUCITE 4F
MSDS Date:05/30/1990
FSC:9330
NIIN:00N057835
MSDS Number: BWRVQ

Emergency Phone: 800-441-3637;800-424-9300(CHEMTREC)

Info Phone: 800-441-3637

Cage: 0ERJ7

Telephone: 800-441-7515

Cage: 0ERJ7

NON-HAZARDOUS INGREDIENTS

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST:THERE IS NO INFO ON INGEST TOX
OF PRODUCT. INGEST IS NOT PROBABLE ROUTE OF EXPOS. TOX IS PREDICTED
TO BE LOW. SKIN:THERE IS NO DATA ON SKIN IRRIT/SKIN SENSIT
PROPERTIES OF PRODUCT. HOWEVER, BAS ED ON INFO ON SIMILAR PRODS,
NUISANCE PARTICULATES MAY CAUSE IRRIT. MOLTEN POLYMER CONTACTING
SKIN(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZS:WILL CAUSE THERMAL BURNS.
EYES:MECHANICAL IRRITATION ONLY. INHAL:GROSS OVEREXP TO NUISANCE
PARTICLES, REGARDLESS OF HOW GENERATED, MAY CAUSE IRRIT OF THE RESP
TRACT. CHRONIC:NONE KNOWN.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid:INGEST:CALL MD IMMEDIATELY . INHALATION:IF EXPOSED TO DUST,
MOVE TO FRESH AIR. IF BREATHING DIFFICULTY PERSISTS, CONSULT A
PHYSICIAN. SKIN:WASH WITH SOAP AND WATER. IF MOLTEN POLYMER
CONTACTS SK IN, COOL RAPIDLY WITH COLD WATER. DO NOT ATTEMPT TO
PEEL POLYMER FROM SKIN. OBTAIN MED ATTN FOR THERMAL BURN.EYES:WASH
WITH LARGE AMOUNTS OF WATER IMMEDIATELY FOR AT LEAST 15 MINUTES.
CALL PHYSICIAN.

Flash Point:572F,300C
Extinguishing Media:WATER, CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:SOLID POLYMER CAN BE COMBUSTED ONLY
W/DFCLTY. AN ELECTROSTATIC CHARGE CAN POTNTLY BUILD UP WHEN POURING
BEADS. GROUNDING OF EQUIP IS RECOM. COMPLETE (SUPP DATA)

Spill Release Procedures:PICK UP SPILLED POLYMER TO AVOID SLIPPING
HAZARD.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE. KEEP
CONTAINERS CLOSED TO PREVENT CONTAMINATION.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN . NOT REQUIRED IF LOCAL VENTILATION IS
ADEQUATE.
Ventilation:LOCAL VENTILATION SHOULD BE USED OVER PROCESSING EQUIPMENT
TO AVOID DUST CONDITION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED SAFETY GLASSES .
Other Protective Equipment:LONG SLEEVE SHIRT IS RECOMMENDED WHEN
HANDLING POLYMER TO AVOID SKIN CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ:COMBUSTION GIVE CARBON DIOXIDE AND WATER. INCOMPLETE
COMBUSTION GIVES, IN ADDITION, CARBON MONOXIDE AND HYDROCARBON
OXIDATION PRODUCTS INCLUDING ORGANIC ACIDS, ALDEHYDES, AND
ALCOHOLS. HAZ D ECOMP PRODS:INCLUDE CARBON MONOXIDE ANDORGANIC
ACIDS, ALDEHYDES AND ALCOHOLS.

Solubility in Water:NEGLIGIBLE
Appearance and Odor:BEADS WITH A TYPICAL "METHACRYLATE" ODOR.
Percent Volatiles by Volume:<1

Stability Indicator/Materials to Avoid:YES
NONE ARE KNOWN.
Stability Condition to Avoid:TEMPERATURES ABOVE 392F,200C.
Hazardous Decomposition Products:SOME ORG ESTERS MAY BE GENERATED BY
DECOMPOSING POLYMER, THESE MAY CNTN METHACRYLATES. OTHER DECOMP
PRODS (SUPP DATA)

Waste Disposal Methods:LANDFILL OR INCINERATION IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.